Kartasan House / Atelier Vens Vanbelle

first_imgManufacturers: VELUX Commercial, Renolit Photographs:  Tim Van de Velde, Atelier Vens Vanbelle Manufacturers Brands with products used in this architecture project Belgium Area:  190 m² Year Completion year of this architecture project “COPY” CopyHouses, Restoration•Ghent, Belgium Save this picture!© Tim Van de VeldeRecommended ProductsWoodTechnowoodPergola SystemsPorcelain StonewareCosentinoSurfaces – Dekton® Chromica CollectionWoodStructureCraftEngineering – Architectural & FreeformWindowsOTTOSTUMM | MOGSWindow Systems – BronzoFinestra B40Text description provided by the architects. The original building consisted of two floors and an attic, plus a courtyard that is separated from the street by a garden wall. The inner structure of the house was in a poor condition and the rooms were too small, so it was decided to keep only the facade and build a complete new structure in the house.Save this picture!Courtesy of Atelier Vens VanbelleAn oak tree trunk was placed as new support structure in the middle of the pentagonal plan. The new upper floors were hung in a spiral movement between the existing exterior walls and this central support. This led to an open interior space without interior walls in the living areas. The tree was a logical and affordable solution, and it immediately gave the right atmosphere to the new home. The bathroom, kitchen, entrance and storage / laundry room were compiled in a vertical volume.Save this picture!© Tim Van de VeldeThe ground floor is used as a studio by the owner, who is an artist, and the higher you go in the home, the more private the spaces becom. The bedrooms are located in the attic.Save this picture!© Tim Van de VeldeSave this picture!SectionsSave this picture!© Tim Van de VeldeThe existing facade was restored back to its original state, and the roof was replaced. This created a small viewing deck, overlooking the park in front of the house.Save this picture!© Tim Van de VeldeBecause the new floors were randomly positioned according to the existing windows, exciting vistas and lighting conditions were created. In the dining room on the first floor a large window towards the courtyard was added.Save this picture!© Tim Van de VeldeProject gallerySee allShow lessUppsala Entré / Svendborg ArchitectsSelected ProjectsHouse in Matsuyacho / Shogo ARATANI Architect & AssociatesSelected Projects Share Architects: Atelier Vens Vanbelle Area Area of this architecture project Save this picture!© Tim Van de Velde+ 31 Share CopyAbout this officeAtelier Vens VanbelleOfficeFollowProductsWoodConcrete#TagsProjectsBuilt ProjectsSelected ProjectsResidential ArchitectureHousesRefurbishmentRestorationGhentOn InstagramBelgiumPublished on September 29, 2017Cite: “Kartasan House / Atelier Vens Vanbelle” 29 Sep 2017. ArchDaily. Accessed 11 Jun 2021. ISSN 0719-8884Browse the CatalogWoodTechnowoodPergola SystemsWindowsMitrexSolar WindowMetal PanelsAurubisPatinated Copper: Nordic Green/Blue/Turquoise/SpecialCommunications2NIntercom – 2N® IP BaseSkylightsLAMILUXGlass Skylight FE Pyramid/HippedConcreteKrytonCrystalline Waterproofing – KIMWood Boards / HPL PanelsBruagWall Cladding – MDF Perforated PanelsStonesMikado QuartzQuartz Slab – ClassiqueFloorsFranken-SchotterFlooring Panels – Dietfurt LimestoneWindowspanoramah!®ah! CornerFittingsSaliceStorage Accessories – Excessories, Pull- outArmchairs / Couches / Futons / PoufsEmuSeating System – TamiMore products »Save想阅读文章的中文版本吗?绕树而居,为建筑师的脑洞打call / Atelier Vens Vanbelle是否翻译成中文现有为你所在地区特制的网站?想浏览ArchDaily中国吗?Take me there »✖You’ve started following your first account!Did you know?You’ll now receive updates based on what you follow! Personalize your stream and start following your favorite authors, offices and users.Go to my stream Dries Vens, Maarten Vanbelle Photographs Projects 2016 Houses “COPY” ShareFacebookTwitterPinterestWhatsappMailOrhttps://www.archdaily.com/880572/kartasan-house-atelier-vens-vanbelle Clipboard Lead Architects: Kartasan House / Atelier Vens VanbelleSave this projectSaveKartasan House / Atelier Vens Vanbelle Year:  Kartasan House / Atelier Vens Vanbelle ArchDaily ShareFacebookTwitterPinterestWhatsappMailOrhttps://www.archdaily.com/880572/kartasan-house-atelier-vens-vanbelle Clipboardlast_img read more

Network Automation with Ansible

first_imgOS10 and Automation solutions overviewThis era of digital transformation aims at reducing operational costs for IT infrastructure, as a result of which converged IT processes are becoming increasingly important. DevOps is an operational model that helps businesses achieve agility, efficiency and as of late networks are also becoming part of this model.Network automation is a crucial component in this model, as networks are expected to act, react and perform reliably based on the changing business needs.OS10 is a next-gen Linux based network operating system that provides a rich set of programmatic interfaces to configure and maintain network devicesThis ability of OS10 and integrations with tools like Ansible makes it a prime choice to operate well in DevOps environments. Ansible Integrations provide the ability to treat network equipment as software components thus reducing the complexity of automating configuration and maintaining the networks.Dell EMC networking and Ansible AutomationDell EMC Networking integration with DevOps tools such as Ansible helps simplify network deployment, improve uptime, increase configuration consistency, add capacity more easily, and reduce overall OpEx.The most common use cases for network automation will be Rapid provisioning, configuration management and deploying configs at scale. The 1990’s model of network provisioning through CLI and some TCL scripts will simply not work with the present web-scale networks. The below figure depicts how networks were configured before the advent of automation choicesNetwork provisioning usually involves a fair mix of the following tasks, infrastructure set up like DHCP, AAA and SNMP servers, switch deployment which includes racking and powering up the switch and switch configuration and validation. The network administrator is expected to build a configuration from scratch or copy paste previous configurations and edit it manually by hand to create the new configuration. This new configuration is built in a staged environment and then installed /shipped to its permanent location. This process does not scale and is highly error-prone, which makes fabric wide network validation a nightmare.What is Ansible?Ansible is a radically simple IT automation engine that automates cloud provisioning, configuration management, application deployment, intra-service orchestration, and many other IT needs.Designed for multi-tier deployments since day one, Ansible models your IT infrastructure by describing how all of your systems inter-relate, rather than just managing one system at a time.It uses no agents and no additional custom security infrastructure, so it’s easy to deploy – and most importantly, it uses a very simple language (YAML, in the form of Ansible Playbooks) that allow you to describe your automation jobs in a way that approaches plain English.Ansible and DellEMC IntegrationsDellEMC network devices and networking software can be automated through Ansible. DellEMC networking provides support for Ansible modules and Ansible roles to deploy and maintain OS10 and OPX offerings. The DellOS ansible role library can be found in ansible galaxy, which facilitates feature-specific configuration on devices running OS10/OPX including installing and upgrading software images on the network device.OS10 modules for Ansible dellos10_command: Run commands on remote devices running OS10dellos10_config: Manage configuration sections on remote devices running OS10dellos10_facts: Collect facts from remote devices running OS10OS10 Roles for AnsibleThere are 26 ansible roles available for OS10 and few of them are as DellOS-BGP, Dell)S- Image Upgrade, DellOS-VLT etc.,Key Benefits of Ansible Integration with OS10 SolutionBenefits DeploymentAnsible Integration reduces deployment time and operational costs needed to deploy a Data Center or campus network. IdempotencyAnsible modules are idempotent and this gets network device to the desired state without affecting the existing state. ExtensibleAnsible can be integrated into many existing DevOps workflows making network a part of the IT environmentcenter_img ScaleAnsible integration with OS10 can help automate network devices at scale by using template based solutions. AgentlessAnsible does not require a agent on the switch, so it can be run against any DellEMC networking devices SummaryIT transformation calls for networks that are reliable and can be automated at scale. Ansible integration with Dell EMC Networking enables networking devices to be part of DevOps operating model, making the networks more agile and reliable.It’s time to modernize the way to build, design and deploy networks by taking advantage of DevOps tools integrations like Ansible with DellEMC networking.For more information on ansible integration with DellEMC networking software, please contact [email protected] or send queries to [email protected]last_img read more